Resin Driveways in Addlestone
We design and install premium resin bound driveways across Addlestone. Enhance your property's kerb appeal with a durable, permeable and weed-free surface. Every drive comes with a free survey and a five-year workmanship warranty.
Local Resin Driveway Installers in Addlestone
A town between Weybridge and Chertsey that we cover frequently. Mix of Victorian, inter-war and post-war housing, plus some newer builds around the town centre regeneration area. Based 10 minutes away in Weybridge, our team knows the roads, the housing stock and the local ground conditions.
We offer over 40 aggregate colours to suit your Addlestone home. Warmer natural stone blends suit older brick and clay tile, cooler greys and blacks sit better against render and modern glazing. We bring samples to every survey so you can see them in daylight against your own walls before deciding.
We have been installing resin bound driveways across Runnymede for fifteen years. Full accreditation, full insurance. In our experience, those are the things clients care about most once the colour decision is made.
Why Addlestone Homeowners Choose Resin Bound
There is a clear reason resin bound has become the most popular driveway surface across Surrey. It solves the problems that come with every other option. Gravel travels. Tarmac cracks and fades. Block paving lifts and lets weeds in. Concrete stains and is hard to repair neatly. Resin bound does none of these things.
The stone aggregate is mixed with clear resin before being laid. What you get is a smooth, porous surface bonded together as a single piece. Water drains through naturally. Nothing loosens under tyres. The surface you see when the job is done is essentially the surface you will have ten years later.
Most of our installations last fifteen to twenty-five years with minimal upkeep. We provide a five-year workmanship warranty on every Addlestone project.
Resin Bound or Resin Bond?
Resin bound and resin bond are often confused, even by suppliers. Here is the practical difference.
In resin bound, aggregate and resin go into a forced action mixer together. Every stone is coated before being laid as a flat, smooth surface. Water drains through the gaps between stones. In resin bond, dry stone is broadcast over wet resin and left standing proud. It costs less upfront. It is not classed as permeable, so it may require planning permission on front gardens. Stones loosen around wheel tracks over time.
For most Addlestone homeowners, resin bound is the right choice. It lasts longer, drains properly and does not require a planning application.
What We Actually Lay: Materials and Depths
Resin
We use a two-part polyurethane binder, the DALTEX UV-stable system. It cures clear, bonds permanently to the aggregate and does not yellow over time.
Depth
On a driveway we lay at 16 to 18mm minimum. Paths with predominantly foot traffic can be 14 to 16mm. Going thinner on a trafficked surface leads to flex cracks.
Aggregate
We use kiln-dried SUDS-compliant aggregate in 1 to 3mm, 2 to 5mm and 3 to 6mm grades. Larger aggregate gives more texture; finer sizes are smoother and more contemporary.
Systems
We install on MOT Type 1, tarmac and concrete. On sound tarmac or concrete we can overlay directly. Soft or failing surfaces get a full dig-out and new sub-base.
Installation and Access in Addlestone
New Road and Station Road can be congested at peak times. Most residential roads are fine. Some roads near the Bourne are prone to flooding.
A high-quality resin bound installation requires proper groundworks. If your current tarmac or concrete driveway is solid, we can often apply the resin directly over it, saving you time and money. If the existing surface is failing, our team handles full excavations and constructs a new MOT Type 1 sub-base to ensure your driveway lasts for decades without sinking or cracking.
What Goes Wrong with Cheaper Installations
- Resin mixed too thin: If the resin-to-aggregate ratio is wrong, the bond fails early. Stones come loose and the surface is gone within a year or two.
- Wrong mixer type: A forced action mixer coats every stone evenly. Gravity or pan mixers leave patches. Those patches fail first.
- Insufficient depth: Driveways need at least 15 to 18mm. Thinner applications flex under car tyres. Once the surface cracks, water gets underneath and the damage spreads.
- Failing sub-base: Resin bound cannot rescue a compromised base. If the tarmac or concrete underneath is cracking or shifting, those movements transfer straight to the surface above.
- Off-spec resin: Trade-grade resins formulated for traffic and UV exposure cost more. Some contractors substitute cheaper products. The visible result after a few years tells the story.
Addlestone Price Guide
Prices in Runnymede typically range from £60 to £150 per m², depending on driveway size, groundwork requirements and aggregate choice. Get a free site survey for your exact figure.
Small driveway (up to 30m²)
from £2,400
Medium driveway (30 to 60m²)
from £3,200
Large driveway (60 to 100m²)
from £5,400
New sub-base included
+£20 to £35 per m²
SUDS and Planning Permission in Addlestone
Resin bound is fully permeable. Water drains straight through the surface and into the ground, which means it satisfies the SUDS (Sustainable Urban Drainage Systems) rules that apply to front driveways in England.
In practical terms, most Addlestone homeowners do not need planning permission before installing a resin bound driveway. Runnymede Borough Council follows the same national permitted development framework. If you are widening the entrance or dropping a kerb, that is a separate application to Surrey Highways. We can walk you through what applies to your site.
Get a Free Quote
Leave your details and we'll call you to arrange a free, no-obligation survey.
Ready for a free Addlestone survey?
A free site visit, a proper assessment, and a written quote with no pressure. We aim to get the quote to you within two working days.
Request Your Free QuoteResin Bound Paths, Patios and Pool Surrounds
The same resin bound system suits the rest of your outdoor space. We install resin bound paths, patio areas, garden steps and pool surrounds, matching the drive or picking out a contrasting blend. A resin surface is easier to keep clean than paving slabs, with no weeds between joints. Adding it while we are already on site costs less than booking a separate visit.
Addlestone and the Surrounding Areas
Our team works across Runnymede on a regular basis. Addlestone is 10 minutes from our Weybridge base and a routine part of our schedule.